Latest tube light fitting repair Tenders | Government tube light fitting repair Tenders

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45584527

04 Jul, 2026 35.31 Lacs

Sheopur - Madhya Pradesh

Tender For construction of work primary school building jakhada with electrical and sanetary fitting gram and gram panchayat jakhada block karahal district sheopur

CTN :45584536

04 Jul, 2026 69.24 Lacs

Sheopur - Madhya Pradesh

Tender For construction of work 03 prayogshala room and 03 extra room with electrical fitting govt h s school dhodhar gram and gram panchayat dhodhar block sheopur

CTN :45584538

04 Jul, 2026 69.24 Lacs

Sheopur - Madhya Pradesh

Tender For construction of work 03 prayogshala room and 03 extra room with electrical fitting govt h s school maanpur gram and gram panchayat maanpur block sheopur

CTN :45584555

04 Jul, 2026 48.88 Lacs

Sheopur - Madhya Pradesh

Tender For construction of work 03 prayogshala room and 01 extra room with electrical fitting raghunathpur gram and gram panchayat raghunathpur block vijaypur district sheopur

State Government

CTN :45504710

23 Jun, 2026 12.00 Lacs

Balaghat - Madhya Pradesh

Tender For electrical material for construction and maintenance work - electrical items, mcb 10-a (havells, anchor, polycab, orient), mcb 16-a (havells, anchor, polycab, orient), mcb 32-a (havells, anchor, polycab, orient), 40a isolator dp, 6a switch normal (havells, anchor, polycab, orient), 6a socket normal (havells, anchor, polycab, orient), 10a switch normal (havells, anchor, polycab, orient), 10a socket normal (havells, anchor, polycab, orient), 16a switch normal (havells, anchor, polycab, orient), 16a socket normal (havells, anchor, polycab, orient), indicator normal (havells, anchor, polycab, orient), regulator step 1 normal (havells, anchor, polycab, orient), 6a switch modular (havells, anchor, polycab, orient), 6a socket modular (havells, anchor, polycab, orient), 10a switch modular (havells, anchor, polycab, orient), 10a socket modular (havells, anchor, polycab, orient), 16a switch modular (havells, anchor, polycab, orient), 16a socket modular (havells, anchor, polycab, orient), indicator modular (havells, anchor, polycab, orient), regulator step 1 modular (havells, anchor, polycab, orient), bell - anchor or hawells, 2 pin top, three pin top 5 amps, three pin top 15 amps, capacitor for ceiling fan 2.25 mfd, capacitor for ceiling fan 3.15 mfd, elcb s.p. 32 amps legrand, elcb with mcb 4 pole legrand 63 amps, copper wire + plate, holder angle/round, round plate, ceiling rose, fan box, wire pvc to vir wire 1.0 mm-(havells, anchor, polycab, orient) bundle, wire pvc to vir wire 1.5 mm-(havells, anchor, polycab, orient) bundle, wire pvc to vir 2.5 mm -(havells, anchor, polycab, orient) bundle, wire pvc to vir 4.0 mm -(havells, anchor, polycab, orient) bundle, wire pvc flexible twin coard 2.5x3 (havells, anchor, polycab, orient) (red, yellow, blue colour), wire pvc flexible twin coard 1.5x2 (havells, anchor, polycab, orient) (red, yellow, blue colour), wire pvc wire flexible twin coard 0.75x3 (havells, anchor, polycab, orient) (red, yellow, blue colour), socket with mcb sp 32 amp with 3 pin top including ms board industrial type, insulation tape bundle- steel grip, screw 20x8, screw 25x8, screw 30x8, screw 35x8, screw 45x8, screw 50x8, screw 60x8, machine screw 1.5 inch, wire supply pipe 10 feet, deep junction box, 12 modular box, 6 modular box, 12 modular metal box, 6 modular metal box, 6 modular plate, 4 modular plate, 3 modular plate, plug point 15 amps with base indicator (open type), plug five pin 15 amps. cat no. 30828, piano type switch 5 amps -anchor, piano type switch 15 amps -anchor, post light fitting cfl lamp 23 watt cat. no. 8199 kalki/ phillips (garden light), pvc plate 6 moduler, pvc plate 8 moduler, pvc plate 12 moduler, mcb box way double, bend, fan ceiling 48" (havells, crompton, polycab, v-guard, bajaj), fan wall 16" (havells, crompton, polycab, v-guard, bajaj), stand fan (havells, crompton, polycab, v-guard, bajaj), fan exhaust 9 almonard make in and out air system ( heavy duty), fan exhaust 6 metal body make unique, led bulb 9 watt (havells, crompton, bajaj, wipro, syska, orient), led bulb 12 watt (havells, crompton, bajaj, wipro, syska, orient), led bulb 18 watt (havells, crompton, bajaj, wipro, syska, orient), led bulb 25 watt (havells, crompton, bajaj, wipro, syska, orient), tubelight led fitting 20 w energy saving batten type (4 feet) (havells, crompton, bajaj, wipro, syska, orient), tubelight 36 watts (true light)- (havells, crompton, bajaj, wipro, syska, orient), led pole light waterproof 50 watt (havells, crompton, bajaj, wipro, syska, orient), led pole light waterproof 100 watt (havells, crompton, bajaj, wipro, syska, orient), flase ceiling light 9 watt (havells, crompton, bajaj, wipro, syska, orient), flase ceiling light 12 watt (havells, crompton, bajaj, wipro, syska, orient), flase ceiling light 15 watt (havells, crompton, bajaj, wipro, syska, orient), flase ceiling light 20 watt (havells, crompton, bajaj, wipro, syska, orient)

CTN :45536897

22 Jun, 2026 20.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of site clearance and amp earthwork is 1200 , kero heater , pcc is456 , rcc m20 footing and column and slab , reinforcement steel fe500 , brickwork 230mm is1077 and flooring anti skid , internal plaster 12mm , doors flush and windows alluminum and glass , electrical led and wiring , plumbing and sanitary , ceiling gypsum vip , painting exterior and interior external lighting and poles , water supply tank and pump , transportation and logistics remote area , contingencies and solar panel 5kva and invertor and battery 5kva , generator 5 kva electrical led and wiring is 732 , mirror 5 h 2w ft and bench 5 h 2w ft , chair plastic with arm , toilet sheet western with exhaust fan and water faucet and hand jet assy , electric fitting work , changing room 6 by 6 by 10 ft and bathroom 6 by 6 by 10 f , multipurpose hall structure , chair vip sofa and centre table , podium and tt table and carrom set , yoga mats fire extinguisher , 86 inch interactive pannel , drainage and cement road work tin shed wk on viewer seating iron poles and tin sheet hooks screw and iron channel , ground civil work , excavation work

CTN :45533901

22 Jun, 2026 18.24 Lacs

Aligarh - Uttar Pradesh

Tender For बरौला में ट्रंासफर स्टेशन के लिए रैम्प, विघुत संयोजन हेतु कमरों का निर्माण एंव विघूत फिटिंग का कार्य। - ramp for the transfer station in baraula, construction of rooms for electrical connection and electrical fitting work.

State Government

CTN :45095884

25 Jun, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various consumables items for emd ii unit 3, 4 & 5, utps. (emd - 5 et-6261) - w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., kli - nit ct-2 self spraying type in 350ml can packing, grease gun, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch, rechargeble torch, puf seal self expanding foam for sealing, measure tape 30 meter, pebble ral 7032 color spray bottle for electrical ht / lt panel, impact wrench power/battery operated, platform truck.size:-60 length x 35 width, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, hand drill machine size 13mm, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, filler gauge set of 26 blades, skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, high speed portable blower,550 w (min.),cap-3.8 m3/minute,16000 rpm,1.7 kg., bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, hss drill bit set 3 mm to 12 mm, high abrasion (12000 abrasion cycles) with cut & mechanical hazard safety hand gloves made from 100 micro foam nitrile coated over breathable hppe thinnest cut resistance shell

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Tube Light Fitting Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government